Replace Lock in UPVC Door
If you have a upvc door lock that isn't working properly, you must call an expert locksmith. They are fast efficient and will complete the work to an excellent standard.
It's not difficult to change the bar lock made of upvc. You just need to know the procedure and follow the steps below.
Eliminating the Barrel Lock
Upvc windows and doors are extremely common in a wide range of properties. They let natural light get into the home and be opened easily with the right key. Changing the lock barrel on an uPVC door is a straightforward job that only takes five minutes. If you have lost your keys, or a tenant left and hasn't returned them, or the barrel of the lock is damaged and needs to be replaced, this is an easy solution.
You'll need to remove the handle screws first. The handles will be moved out of the way to allow access to the barrel screws for the lock. Be cautious not to loosen the screws too quickly because this could damage the handles or cause them to fall off while you're working.
Once upvc window lock mechanism replacement have been removed After removing the screws, look for the screw on the inside of the door that is holding the lock on the barrel. This screw is distinct in color to the other screws on your door and sticks out. Utilizing an Phillips screwdriver, remove this screw. Use the key you use to unlock the lock and then insert it into the barrel. Turn it as far to the right as you can. This will release the barrel which makes it easier to remove the door.
After loosening the screw, you are now able to break the pins that hold the Euro Cylinder in place. To accomplish this, you'll need strong pliers or mole grips. Take the protruding portion of the euro cylinder, and bend it from side to side, and then up and down. This will break the two pins holding it in place.
When the old cylinder is gone, you can begin the process of putting in the new one. First, you will need to determine the size of the lock cylinder to make sure you have purchased the appropriate replacement. This can be accomplished by measuring the distance from the center of the circular portion of the keyhole, to the center of the square spindle. The measurement should be taken at the upper spindle.
Changing the Cylinder
The primary locking mechanism is an euro cylinder. It is simple to replace and doesn't require a locksmith or handyman. In fact, if the lock you have isn't anti-snap or anti-bump it should be changed to one with this protection included. They are very affordable and could save you money as well as inconvenience if your locks have been affected by these security threats.
To start to begin, open the door and stand in front of it, so that you can easily reach the screw that holds the handle by hand or using a suitable tool. Let it loosen a bit perhaps one quarter turn to start the process.
After this is completed the cylinder will come out easily because it is no longer fixed by the screw. The next step is to determine what size replacement cylinder you will require. There are about 25 different sizes to choose from. You should bring your old cylinder with you when you purchase the new one to ensure it fits.
If you're not sure of the measurement, take a measurement from the center of the screw hole to the cylinder's end. This is the only way to make sure you're getting the correct size cylinder for your upvc doors.
Insert the new cylinder into your door the opposite way you removed the old one. It might be difficult to align the lock cam, but this is usually just an issue with alignment and should come right eventually.
It is now time to screw the long securing screw back into place. Once you have done this, you can test the new cylinder to ensure it is secured within the door. If you're satisfied with how secure it is, you can reconnect the handle and close the door to test again. If everything is fine, the cylinder lock inside your Upvc door has changed and you should have added another layer of security to your home.
Switching the Handle
There are many reasons why the handle of a door or door knob may become loose. It can be due either to the wear and tear of the handle or the spindle that is square inside the handle. In this case the door handle will need to be replaced.
It is essential that the door be propped open so it cannot close between taking the handle off and replacing it. Remove the screws from the interior surface of the plate with a screwdriver. This will free your handle from the plate. Do not lose the screws, as you may need to re-screw them later.
After the handles have been removed, you will be able to access the cylinder lock within the door. The lock will be a circular or bulb-shaped cylinder. It is only found in multi-point locks on upvc doors and some doors made of aluminium. The procedure for changing the cylinder is similar to the process of changing the handle however, you'll have to remove the old cylinder from the door and replace with a new one.
It is crucial to consider the size of the handle replacement when selecting one. The handle must be the same size as the one that came with it, because it must fit the existing screws holding the handle in place. The best place to begin is by using a size matrix that will list the common sizes of replacement handles along with their keyhole center to handle plate distance.
It is also worth changing your handles for your Upvc doors to higher security standards such as a Sold Secure SS301 or 2* Kitemark set of security handles. This will improve the security of your home and make it easier to operate your door. These sets are slightly more expensive however the increased security and peace of mind is worth the cost. The constant need to push the handle of the door up and down to shut and open it is not something you would like to be doing.
Change the Lock
The security lock on your uPVC door could be a weak point for burglars. It is possible to upgrade your uPVC door with a multipoint lock to ensure it is secure. This could include a deadbolt and an open hook to ward off intruders. A professional locksmith can assist you with this, but it is also possible to complete the work yourself. The process is simple and simple. You'll only require a few simple tools.
The first step is to loosen the screws that hold in the handle. Using a screwdriver, you can remove the screws and put them in a safe spot. Then, you lift up the handle to reveal the screw that holds the cylinder in the position. You can unscrew this screw and replace it with a a new one. Make sure the screw you choose to replace is of the same size as the one you used before. It should be aligned properly with the lock barrel.
The process of changing the lock on your uPVC door can seem intimidating. It is essential to the security of your home. If you make mistakes, it may cause you to be unable to open the door. If you know how, it's relatively easy and costs less than calling professional locksmiths.
You will need to remove the faceplate on the inside of the lock to switch the lock. You will need to be able to identify the screw that is located inside the door and the bolt that holds it on the outside of the door. Once you are able to access these screws, you are able to remove the faceplate and replace the cylindrical.
You might need to alter the lock on your uPVC door for several reasons. It could be because you lost your key, a tenant moved out and didn't return keys, or you simply want to increase the security of your home.
Anyone with a basic DIY skill can alter a uPVC locking mechanism. You'll need to check the internal hinges of the mechanism. This can be a challenge when the lock is stuck. If the hinges have been lubricated, it should be a straightforward repair. If you aren't confident doing this, it's recommended to contact a professional.